Integrated Test Device For Circular Saw Switch And Lower Guard
Standard: EN 60745-2-5: 2010 Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301, IEC60745-2-5:2003 Annex BB.20.102, EN 60745-2-5:2010 clause 17.101 and clause 19.102.3.
Application: It is used to test the circular saw switch performance and circular saw lower guard’s durability and recovery time.
Test sample: Circular saws
Feature: This equipment is composed of two parts, the mechanical system and electrical control system.
Mechanical system is the table for circular saw. There are a switch and sample socket on the table, operator can push the switch to turn on or off the load power supply to the test sample; different sizes of circular saws can be placed and fixed on the table; on the table, device for locking the switch of the hand-held circular saw in the “on” position; the blade can extend to the bottom of the table through the middle groove; on the table where under the blade, there are a the lower guard putter and two position sensors , which can be drive the lower guard of the circular saw to be opened or closed.
The electrical control system consists of the load power supply, MITSUBISHI PLC, 7 Inch Touch screen and etc. Can achieve manual operation and automatic operation.
Parameters:
| No.: |
Serial No.: |
Parameter |
Remark |
| 1 |
Input Power |
220V/50Hz |
|
| 2 |
Control System |
Mitsubishi PLC, 7-inch touch screen |
|
| 3 |
Station |
One |
|
| 4 |
Built-in Load |
0~250V/5KW voltage regulator, equipped with B socket |
|
| 5 |
Test Cycles |
0-999999, can be preset |
|
| 6 |
Test Speed |
≥10 freq/min |
|
| 7 |
Guard Recovery Detection Time |
0.01-9.99s, can be displayed |
Recovery time |
| 8 |
Circular Saw Switch Locking Device |
Lock or release the switch by motor driving |
|
| 9 |
Operation Buttons |
Stop and Start buttons on the panel for operator easily cut off or turn on the power |
|
Product Tags:
|
|
Integrated Electric Testing Equipment For Circular Saw Switch Lower Guard Images
|
